skip to content
AuScope VLBI Operations Wiki
You are here:
Documentation for operators
This wiki is not maintained! Do not use this when setting up AuScope experiments!
IMPORTANT INFO for Chris/Anita for Hb The disk in bank A needs to be changed over tomorrow while Brett is out at Mt. Pleasant and while there is a gap in the schedule.
Recording to HOB+0129, start position 5804
System checks were
conducted - don't forget next time! (like I did…)
scan 255-0220 missed at Hobart while handling a module swap
Recording to HOB+0124, start position 5718
Power outage, switched to generator at UT 10:37. Doesn't seem to have affected any scans.
sync error with Mark5B. fmset run at UT 10:58
Antenna stuck. Scans from UT 11:00 to 11:09 affected. Associated scans are: 1739+522, VR422201, 1519-273, 2232-488
3C446 at UT 11:14 is waiting at limit
UT 11:48 Halted schedule. gpib issues –> formatter-mk5 clock problems. Schedule restarted at UT 12:47. First source is 1958-179.
Data from UT 11:00 to 12:53 is probably unusable.
Recording to HOB+0121, start position 2159
System checks - Pointing done on eso212 (04:02 UT)
2014.254.04:08:28.18#fivpt#xoffset 212.4627 60.0973 -0.00062 0.00720 0.00378 0.00324 1 1 eso212
Started 03:44, ended 04:26.
First missing scan: 254-0344
Last missing scan: 254-0423a
There was a FS outage at around 07:50 UT and eRCTL collapsed. Jonathan Quick had fixed the problem but just forgot to restart the eRCTL daemon.
eRCTL has intermittent connection. Jonathan Quick sent email about this.
You could leave a comment if you were logged in.
· Last modified: 2014/09/12 02:24 by
Back to top