User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!


Station checks performed after A1524 was completed. Pointing came back fine for all 3 and everything else seemed fine. One issue was with Hobart's iread: ifc and ifd power values were a lot higher than they should be. (Ellen)


Module: HOB+0121 start pos 4128.7 GB

  • 18:00 UT - Experiment started ok except that recording didn't start till it was meant to end and so 3 seconds of the first source we recorded. (Ellen)
  • 02:30 UT - disk_pos seems to drift ahead. Now +100 GB. We had changed the recording in order to not loose so much recored data. Now the scans start on the right time, but they are recording too long. This causes several onsource SLEWING alarms. (Lucia)
  • 08:08 UT - Disc pos ~ 170 GB ahead. (Ellen)


Module HOB+0117 start pos 12610 GB

  • 18:00 UT - Experiment started ok.


Module: HOB+0123 start pos 10680 GB

  • 18:00 UT - For some reason recording didn't start for the first scan until AFTER it was meant to finish (even though schedule rolled over perfectly from last experiment) and so stopped as soon as it started. So first scan 168-1800 missed essentially. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/a1524.txt · Last modified: 2015/06/18 12:27 by Jesse Swan