User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!


apsg42 schedule wasn't on ivs server. Needed to go to and download/copy-paste it into a new document.

Hobart 26m

Disk VSN: HOB+1000/8000 | Data volume at beginning: 0.38 GB

  • 17:30UT Experiment started okay (Lucas)
  • 22:00UT Noticed Field system time is 0.5 seconds off mk5 time. Once again didn't want to reset DBBC and introduce clock jump (Lucas).
  • No autocorrelations, I think because I manually drudged the proc file for Hobart26m. Could “hack” the proc file with that from the previous apsg containing Hobart26m (Lucas).
    • Copied a previous checkmk5 from a aua039 proc file. checkmk5 seems to work now(?, Lucas).
  • 23:26UT Last BBC in S band looks pretty dodgy. Monitoring (Lucas).
  • 11:00UT The 70K stage temperature sometimes goes above 65K for a little while, bu then settles back down below 65K.(Katie)
  • 14:48UT 'formatter to fs time difference 0.5 seconds or greater' error, fixed with 'sy=run setcl offset' as suggested in wiki, while not recording. (Patrick)
  • 17:00UT The above error started to reoccur at the start of some scans (Patrick)

Katherine 12m

Disk VSN: HOB+0093 | Data volume at beginning: 0.26 GB

  • 17:30UT Experiment started okay (Lucas)

Yarragadee 12m

Disk VSN: BKG+0101/16000 | Data volume at beginning: 0.26 GB

  • 17:30UT Experiment started okay (Lucas)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/apsg42.txt · Last modified: 2018/04/11 17:29 by Patrick Yates