User Tools

Site Tools


handover:aug004

This wiki is not maintained! Do not use this when setting up AuScope experiments!

aug004

Hobart 12m:

Disk VSN: HOB+0126, Data volume at beginning: 85 GB

  • Pointing solution: 2015.023.23:10:04.24#fivpt#xoffset 223.1793 79.2251 0.00554 -0.01362 0.00242 0.00285 1 1 1618m49

Katherine 12m:

Disk VSN: GSFC+022, Data volume at beginning: 85 GB

  • Pointing solution: 2015.023.23:09:44.20#fivpt#xoffset 175.8087 54.1101 -0.00089 0.00246 0.00199 0.00424 1 1 1618m49
  • UT 14:44 Single alarm sounded at 14:40 ALARM: scan_check reports Mark5 data format problem looks to be no consequences or repetition. (JS)

Yarragadee 12m:

Disk VSN: USN-0002, Data volume at beginning: 24 GB

  • Note that iread values are bad (S-band):
  • /ifa/1,agc,1,25000,34,25468
  • /ifb/4,agc,4,29000,18,28689
  • /ifc/2,agc,2,35000,63,38131
  • /ifd/2,agc,2,35000,63,44721
  • The following point checks were done:
  • 2015.023.23:14:09.20#fivpt#xoffset 150.4285 64.2660 0.05054 0.00538 0.00707 0.06890 0 1 1618m49
  • 2015.023.23:41:07.22#fivpt#xoffset 105.3795 39.5677 0.00000 0.00538 0.01255 0.06890 0 0 1921-293
  • 2015.023.23:52:16.17#fivpt#xoffset 163.0582 67.6059 0.00000 0.00538 0.00620 0.06890 0 0 1618m49
  • The first scan (3C279 at 024-0000) was missed. It appears that bank A of the mk5 does work properly. The troubleshooting was as follows:
  • USN-0002 could not be recorded to in bank A, so it was swapped with HOB+0031 in bank B.
  • USN-0002 could be recorded to in bank B - the module is fine. Swapped to bank A for the schedule.
  • Schedule started, and mk5 issued errors on recording; I thought I checked recording in bank A after the swap, but it appears I did not. Recorded to bank B in time for the second scan.
  • UT 12:43 iread values are still bad but haven't drifted (JS)
  • /ifa/1,agc,1,25000,34,24567
  • /ifb/4,agc,4,29000,18,28779
  • /ifc/2,agc,2,35000,63,37537
  • /ifd/2,agc,2,35000,63,44248
  • The long and short of the disk swap business above is: The module that needs to be recorded to next (AUG005 @11am local time) is in bank A, but Chris was unable to verify if bank A can be recorded to. This module may need to be physically moved to bank B for recording. (JS)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/aug004.txt · Last modified: 2015/01/24 14:46 by Jesse Swan