This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
c1707/v1707
Hobart 12m
Disk VSN: HOB+0130
Data volume at beginning: 0 GB
0004UT - Experiment Started Okay (Liz)
02:49UT - Missed scan 338-0248b, I think perhaps due to the same slow to slew problem as previous experiment. For the most part the telescope is tracking fine but sometimes not…(Liz)
Katherine 12m
Disk VSN: USN+0224
Data volume at beginning: 3491.4 GB
00:12UT - Experiment now okay, had to re-config dbbc from last experiment. Before first scan seemed okay but got sync_err3 after this. So halted sched etc to re-sync with fmset. Fine after this. eremote also died before first scan but fs vnc okay (Liz)
Yarragadee 12m
Disk VSN: USN+0225
Data volume at beginning: 0 GB
00:00UT experiment started okay, but may have just missed start time due to module change. Would say first good scan was 338-0014 at 00:14UT just in case (Liz).
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/c1707_v1707.1512355913.txt.gz · Last modified: 2017/12/04 02:51 by Bryn Emptage