User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!



Module: HOB+0104, 5500 GB

  • 17:00 UT - Experiment started OK (Ross)
  • 00:00 UT - Getting the following error frequently: “Error being ignored: error qk -211 tsys value for device id overflowed or was less than zero.” (Tiege)
  • 06:00 UT - Reciever Error: “ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts.” have continued to monitor the delay and does not seem to be drifting. (Tiege)
  • 07:51 UT - 013-0751 scan missed due to telescope slewing. (Bryn)
  • 1419UT fmset sync issued between scans, delay difference improved (JS)


Module: HOB+0128, 1592.175 GB

  • 17:00 UT - Experiment started OK (Ross)
  • 22:00 UT - NOTE: Shortly after observations began, clock offset increased from stable 0.3 to stable 0.79, Ross left this how it is and it is still stable (@ 0.79) at handover. (Tiege)


Module: MED-11011, 0.000 GB

  • 17:00 UT - Experiment started OK (Ross)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/r1722.txt · Last modified: 2016/01/13 14:26 by Jesse Swan