User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!



Module: HOB+0121, start pos: 1328.564 GB

  • 1700 UT - Experiment started ok. (Ellen)
  • 0947UT Wind-stow (JS)
  • 0953UT Wind-stow released (JS)
  • 1017UT wind-stow (JS)
  • 1030UT Wind-stow released (JS)
  • 1048UT wind-stow (JS)
  • 1053UT Wind-stow released (JS)
  • Scans affected by wind stows: 054-0945a – 054-0951a, 054-1013 – 054-1028, 054-1049a – 054-1053a


Module: HOB+0119, start pos: 309.139 GB

  • 1700 UT - Experiment started ok. (Ellen)


Module: HOB+0130, start pos: 302.948 GB

  • 1700 UT - Experiment started ok. (Ellen)
  • 1708 UT - Delay through DBBC (pps_delay1) has changed from 61949 to 61950. Keeps swapping between these 2 values (ie not drifting) and the delay differences are stable too. Unfortunately, the alarm sounds every 15 mins or so and can't be turned off - Configure in the log monitor only affects delay differences and there's no alarm code to change the action file of the log monitor. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/r1728.txt · Last modified: 2016/02/23 11:42 by Lucas Hyland