This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
R1728
Hobart
Module: HOB+0121, start pos: 1328.564 GB
1700 UT - Experiment started ok. (Ellen)
Katherine
Module: HOB+0119, start pos: 309.139 GB
1700 UT - Experiment started ok. (Ellen)
Yarragadee
Module: HOB+0130, start pos: 302.948 GB
1700 UT - Experiment started ok. (Ellen)
1708 UT - Delay through DBBC (pps_delay1) has changed from 61949 to 61950. Keeps swapping between these 2 values (ie not drifting) and the delay differences are stable too. Unfortunately, the alarm sounds every 15 mins or so and can't be turned off - Configure in the log monitor only affects delay differences and there's no alarm code to change the action file of the log monitor. (Ellen)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1728.1456165550.txt.gz · Last modified: 2016/02/22 18:25 by Ellen Manning