User Tools

Site Tools


handover:r1858

This wiki is not maintained! Do not use this when setting up AuScope experiments!

R1858

Katherine 12m

Disk VSN: USN-0150/4000 | Data volume at beginning: 0.449 GB

VSN did not show up so I manually added it.

  • 1700 UT - Experiment started OK (Tiege)
  • 04:50 UT - Clock jump to 0.326 us (warren)
  • 05:00 UT delay growing, dbbc reconfigure, scans affected 247-0449 to 247-0514 (w)
  • 05:19 UT - 247-0519b next good scan (w)
  • 05:45 UT - clock jump out to 0.32 us (w)
  • 06:40 UT - delay out to 0.45 us (w)
  • 06:45 UT - rebbot and reconfigure dbbc (w)
  • 06:55 UT - back on schedule with scan 247-0655a (w)
  • 08:07 UT - Drifting continues - so reconfigured dbbc (katie)
  • 08:11 UT - Resume, scans missed 247 0847 - 247 0811b (katie)
  • 09:10 UT - Drifting again - reconfiguring (katie)
  • 09:13 UT - Resumed schedule (katie)
  • 09:27 UT - Drifting again so rebooted this time. (katie)
  • 09:43 UT - Resumed schedule (katie)
  • 09:44 UT - FS crashed/then had to reconfigure dbbc again (katie)
  • 10:24 UT - Schedule resumed. Scans missed 247 0909 - 247 1023 (katie)
  • 10:55 UT - Need to reconfigure dbbc (Katie)
  • 10:58 UT - Schedule resumed. Scans missed 247 1054 - 247 1057
  • 11:28 UT - Need to reconfigure again (katie)
  • 11:31 UT - Schedule resumed. Scans Missed 247 1127 - 247 247 1131

Yarragadee 12m

Disk VSN: USN-0049/4000 | Data volume at beginning: 0.449 GB

VSN did not show up, have confirmed above drive via webcam. Was not sure if it is OK to manually add VSN post test-recording?

  • 1700 UT - Experiment started OK (Tiege)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/handover/r1858.txt · Last modified: 2018/09/04 17:19 by Pradyumna Kiran Kummamuru