This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
r4659
Hb
(20:36 UT, Lucia): Large clock drifts (delay differences) from the beginning. After several DBBC config/reboots, looks stable now. First good scan# 303-2028 @303/20:28
recording to module HOB+0105. 0 GB.
strong RFI in last two s-band channels
Deficit of ~120 GB due to late start (vk)
304/02:28 UT - Delay difference has been drifting since around 01:30 UT. JMc says to keep an eye on it until it drops below -0.300 msec.
03:19 UT - Halting schedule to reconfigure DBBC as delay difference has hit -0.330 msec.
03:30 UT - Restarted missed scan: 304-0324
04:00 UT - Halting schedule to reconfigure DBBC as delay difference is drifting.
04:08 UT - Restarted. Missed scans: 304-0353,304-0407a
Ke
recording to module USN-0033. 0 GB
two dodgy chanels in DBBC and high Tsys. This is a known problem.
(20:27 UT, Lucia): lost antenna control due to power failure. Lost scans between 19:29 and 19:48 UT (scan# 303-1940 and 303-1945)
recording to module USN-0178. 0 GB
troubles with Internet Connection to Yg while setting up (could not even ssh to). Yg people fixed that by rebooting the router (?).
More internet problems at about 09:09 UT lost connection and did not get it back until 10:21UT (could have been a lot sooner if I hadn't been holding out false hope that it might fix itself), guys rebooted the D-link
error for fringe check: not successful. Automatically selected source was not visible from Yg (antenna limits reached).
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r4659.1414750928.txt.gz · Last modified: 2014/10/31 10:22 by Ellen Manning