This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
R4762
Hobart
Module: HOB+0098, start pos: 8114.178 GB
18:30 UT - Antenna stuck, experiment will start slightly late. (Tiege)
18:38 UT - Experiment started, however wind stowed immediately. (Tiege)
18:42 UT - First valid scan of the experiment is 294-1846c (Tiege)
Katherine
Module: USN-0067, start pos 888.075 GB
18:30 UT - Experiment started OK. (Tiege)
20:34 UT - “ALARM: error st -999 tcp/ip connection error”, fixed within 15 seconds using antenna=open and antenna=operate, happened between scans so no scans were affected. (Tiege)
Yarragadee
Module: USN+0014, start pos 1185.734 GB
18:30 UT - Experiment started OK. (Tiege)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r4762.1476995852.txt.gz · Last modified: 2016/10/20 20:37 by Lucas Hyland