User Tools

Site Tools


handover:r4762

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


R4762

Hobart

Module: HOB+0098, start pos: 8114.178 GB

  • 18:30 UT - Antenna stuck, experiment will start slightly late. (Tiege)
  • 18:38 UT - Experiment started, however wind stowed immediately. (Tiege)
  • 18:42 UT - Unstowed, First valid scan for the experiment is 294-1846c (Tiege)

Katherine

Module: USN-0067, start pos 888.075 GB

  • 18:30 UT - Experiment started OK. (Tiege)
  • 20:34 UT - “ALARM: error st -999 tcp/ip connection error”, fixed within 15 seconds using antenna=open and antenna=operate, happened between scans so no scans were affected. (Tiege)
  • 20:37 UT - Straight after fixing the above error I got “ALARM: error s5 -104 rfpcn: time-out, connection closed”, have restarted Rxmon to fix. (Tiege)
  • 20:48 UT - 294-2049 will be first good scan after the errors were fixed. Scans affected by both errors are 294-2037 to 294-2045a inclusive. (Tiege)

Yarragadee

Module: USN+0014, start pos 1185.734 GB

  • 18:30 UT - Experiment started OK. (Tiege)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r4762.1476996829.txt.gz · Last modified: 2016/10/20 20:53 by Lucas Hyland