Hobart

Module: HOB+0098, start pos: 8114.178 GB

• 18:30 UT - Antenna stuck, experiment will start slightly late. (Tiege)
• 18:38 UT - Experiment started, however wind stowed immediately. (Tiege)
• 18:42 UT - Unstowed, First valid scan for the experiment is 294-1846c (Tiege)

Katherine

Module: USN-0067, start pos 888.075 GB

• 18:30 UT - Experiment started OK. (Tiege)
• 20:34 UT - “ALARM: error st -999 tcp/ip connection error”, fixed within 15 seconds using antenna=open and antenna=operate, happened between scans so no scans were affected. (Tiege)
• 20:37 UT - Straight after fixing the above error I got “ALARM: error s5 -104 rfpcn: time-out, connection closed”, have restarted Rxmon to fix. (Tiege)
• 20:48 UT - 294-2049 will be first good scan after the errors were fixed. Scans affected by both errors are 294-2037 to 294-2045a inclusive. (Tiege)
• 20:57 UT - Received “ALARM: error st -999 tcp/ip connection error” again, used the same fix as previously, no scans affected. (Tiege)
• 21:08 UT - “ALARM: error s5 -104 rfpcn: time-out, connection closed” error again, this time I restarted Monica, scan affected is 294-2107. (Tiege)
• 21:14 UT - “ALARM: error s5 -104 rfpcn: time-out, connection closed” error again, tried restarting Rxmon again this time, scan affected is 294-2114a. (Tiege)

Yarragadee

Module: USN+0014, start pos 1185.734 GB

• 18:30 UT - Experiment started OK. (Tiege)
• 20:49 UT - Restarted Rxmon to fix “error s5 -23 rfpcn: error opening, rfpic probably not running”, seems to be fine. (Tiege)