This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

---

Post Conditioning Checks:

Use Dimino and tstdimino to check the vsn and pointer setting after conditioning:

dimino -mo -c1 &
tstdimino 
>vsn? 
>vsn? " need to enter twice to get a nice response" 

Make sure the vsn is the same as the front label on the module. If it has been corrupted, you can change the vsn by entering:

>protect=off
>vsn=XXXsxxxx  "eg vsn=BKG-0006" 

To check the pointers are reset to 0:

>protect=off
>pointers=?   " should show 0 : 0 : 0 : 0; " 

More Handy tstdimino commands:

>bank_set=A   "select module A"
>reset=erase  "erase the module without conditioning"