This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

---

Chair: Momtaz

Attended:

Apologies:

Absent:

General Issues

• Please remember to send end and start message and log file.
• FS crashed for a couple of experiments.

Handover Issues

R4896:

Katherine 12m

• Alarm scan check reports Mark5 data format problem (indicated by the letter “E” at the end of the line)(mas)

R1897:

Yarragadee 12m

• I encountered the error TPI Overflow.This froze up the pointing check, not letting it progress any further. It was fixed by again restarting and resyncing the DBBC software(Tiege).

OHG119:

Hobart 26m

• Terminated FS @ 0244 to fix GPIB comms issue. Restarted ~0400 (JMc)
• Schedule was put on halt because of bad wind condition. Will put it back on schedule when wind problem solves out?(Jay)

Yarragadee 12m

• rfpic not answering. disabled in preob to avoid timeout delays (JMc).

R4897:

Yarragadee 12m

• 23:38UT False wind stow alarm from log monitor(Warren).

R1898:

Katherine 12m

• Tsys negative values (~-200 to ~-100)? (Lim).
• ALARM: error m5 -104 mk5cn: time-out, connection closed. Failed to open terminal from within the pcfs(Lim).
• Can't open display in pcfske: “Client is not authorized to connect to Servergv”(Lim).
• ALARM: error m5 -900 : not while recording or playing(Jay).

Yarragadee 12m

• Received consistent error 'error being ignored: error sp -4 unrecognized name (not a function or procedure) after each scan'(mas)