User Tools
Sidebar
operations:click_here
This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
Austral 15, Feb 2015
Are you on shift? Please check the station check schedule on the board and module schedule to make sure you don't miss anything.
IMPORTANT! When preparing for a system check, please be sure recording has stopped and that the disks are idle. Check if the recording is running, for example, with the command
mk5=dot?
If responce to the command contains 'FHG_on', recording is active, terminate with
disk_record=off
and check again. 'FHG_off' indicates that recording is off.
Since the station checks are after schedules have finished, it is unlikely the Mark 5 will still be recording, but it is important to check anyway.
Aust15 Module Schedule
Observers please note: DO NOT edit this spreadsheet unless absolutely necessary.
It is important to stick to this schedule. All stations are very short on big modules in February, so there isn't any margin for error.
/home/www/auscope/opswiki/data/attic/operations/click_here.1422920849.txt.gz · Last modified: 2015/02/02 23:47 by Imogen Jones
