This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

---

Chair: Patrick

next week's chair: Katie

Attended: Mas, Earl, Tiege, Jamie, Katie, Prad

Apologies:

Absent:

General Issues

• Remote observing: anyone tried it? comments, questions, tips?
  • Seems to work well.
  • Still access card only after Easter, but UTAS is strongly discouraging people to be on campus. Might change.
  • Some problems with network access. Waiting on IT department for support for this.
  • There are notes for using SSH gateway as an alternative to VPN. Linked off remote observing page, walks through setting up an SSH tunnel.
• checkmk5 procedure missing from proc files?
  • Jamie will look into slogit & see if it's a simple fix.
• Mixed mode updates?
  • Observing procedure same as before. Still configuring & monitoring outside field system.
  • Future version of FS will be able to do everything itself.
• Fibre works on Mon/Tues
  • Took out wiki, since been repaired. Shouldn't recur
• ops-serv2 was left off after power works 2 weeks ago.

Handover Issues

• AUA063
  • Yg: Started on flexbuffyg, switched to mk5yg later
• R1941
  • Yg: pcfs froze, needed restarting
• APSG46
  • Ho:
    • wrong receiver on axis.
    • Mk5 module write protect error
    • Focus platform linear bearings came loose, needed fixing
    • Received continuous errors “Allocating memory for antenna monitoring”. Fix was rebooting sys26m.