This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

Chair: Katie

next week's chair: Earl

Attended:

Apologies:

Absent:

General Issues

• Don't forget to write in the handover notes if something went wrong and if there were any missed scans. It also really helps to put the UT time so the person doing the logs can easily find which scans were missed/affected.
• If something did go wrong, the state what it was in the logs, don't just write 'yes'.
• Seems like theres almost always no checkmk5 commands and we have to add it.
• with Hobart 26m we often get 'device rx timed out' error.

Handover Issues

• crf118:
  • Hobart26m:
  • 1148 UT Noticed the field system wasn't updating…looks like it has crashed. Restarted and schedule. Then got “Allocating memory for antenna monitoring” error. Rebooted sys26m using “rem_reboot -r rakbus sys26m” on newsmerd and that seems to have worked.Now it's windstowed. will keep an eye when it will be released from windstow. (Jay)
  • clkoff and maserdelay not working after rebooting field system. Something to do with GPIB connection reset. tried restarting GPIB through IP Switches but didn't solve the issue (Jay)