User Tools

Site Tools


operations:documentation.ivs.drudg_9.10.5

This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!


Preparing Schedule and Procedure Files

Open a terminal and ssh into observer@ops-serv2 and run:

~/slogit.auscope_fs9.10.5.sh

When run, it will prompt you for the experiment code and observatory. Both should be entered in lower case. It will download the schedule file (or ask if you want to re-download the file if it currently exists) to /vlbobs/ivs/sched/, copy it to pcfs[hb|ke|yg] (it will check if it will overwrite the file), build the snp and prc files (or offer to re-build them if they exist), copy them to the correct places and finally offer to print off a schedule summary and the procedure file. (Crtl X Ctrl C to print proc file after editing).

Make sure the ifdsx command has the right IFs selected and the right power settings. This is not done by default! See the Current Issues page for the correct settings. Note that yg and hb have the latest software and the levels should be correct but the input IF settings may not be correct. Please double check.

FOR AUSTRAL EXPERIMENTS

Austral Experiments need to have the proc file edited

Open two terminals on pcfs. Enter in one terminal:

more /usr2/proc/aust(previous exp number)

Go to the end of the file and highlight the procedure.

On the other terminal, enter >

more /usr2/proc/aust(previous exp number)

Go to the bottom of the file and paste the checkmk5 procedure.

Ctrl x Crtl c and 'y' to save.

This procedure should be done before the proc file has been run at all.

/home/www/auscope/opswiki/data/attic/operations/documentation.ivs.drudg_9.10.5.1383522345.txt.gz · Last modified: 2013/11/03 23:45 by Imogen Jones