This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
1. Resent experiments that were reviewed:
R1635
CONT1403
CONT1405
CONT1406
CONT1410
R4636
R4637
R1639
R4643
The recent AUSTs experiments are still awaiting correlation and will be reviewed as soon as available. Remasks:
Pointing: pointing offset should be <0.02 degree. If more, investigation should be done asap. Start the pointing procedure if time permits (to check pointing in other directions), log the offset & inform on-call person. If pointing fit repeatedly doesn't converge, dBBC is a likely culprit, especially at Yg.
RFI: if autocorrelation amplitudes look strange, it is likely to be caused by RFI, especially in the two last channels in the S band in Hobart. Report it.
Windstow: a substantial amount of data is lost due to an antenna that get stuck in the windstow position after the wind
/home/www/auscope/opswiki/data/attic/operations/minutes2014_08_06.1407456541.txt.gz · Last modified: 2014/08/08 00:09 by liza