This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

---

1. Look on to Vortex as observer and make sure that /exports/vortex_internal is mounted

   df -h

   If you don't see it, mount it with a

   su
   mount /exports/vortex_internal
   df -h
   exit

2. Log on to the target machine at Tsukuba and create a directory for the log. E.g. for RD1106:

   ssh oper@202.223.161.132
   cd /ddn/vlbi/data/
   mkdir rd1106hb
   exit

3. Then from pcfshb, make sure you can transfer a log file without a password being entered. E.g. for RD1106

   cd /usr2/log
   touch rd1106hb.log
   scp rd1106hb.log oper@202.223.161.132:/ddn/vlbi/rd1106hb/rd1106hb.log

4. Mount the vortex disk on mk5hb

   su
   mount vortex:/exports/vortex_internal /mnt/vortex
   chown oper:oper /mnt/vortex

5. When the field system is started, start the schedule so that the log file is opened, then do a halt.
6. now make a test recording and check that the log files and disk2file work

   disk_record=on
   disk_record=off
   postob

7. Go to Vortex and check that the log file has been copied and the .m5b file is there. Then delete them.