User Tools
Sidebar
This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
The AuScope Checklist GUI
The AuScope Checklist GUI is a program to help in setting up, monitoring, and finishing up observations. It replaces the old printed VLBI checklists. It should be started before an experiment starts and left running until completion.
Usage
On a pcfs machine (e.g. pcfshb):
auscope_checklist.pl
You will be asked for the name of the telescope you want to set up, and the IVS experiment (default is the current or next one). The GUI will then start. There is some header information at the top, followed by a tabbed section for the beginning (“Setup”), during (“Observing”) and finishing up (“After”) section. Click on the tab applicable to the state of the observation.
In the tabbed section are a list of items to be checked with three options. Go through each one, and select Yes, No or “Not checked”. Type in your name in the box provided and press “Submit”. If any further explanation is needed, please put a comment in the log via the oprin window as usual.
