User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!

Yg Field System software update

I’ve upgraded the PCFS software at Yg to the latest version (9.11.2) and also the station-specific version (st-0.0.1-9.10.5_ifpic). It looks OK on testing except for the following:

* systemp12 is still producing nonsensical results * ifpic reports values back as expected but it can’t be used to change things. I think this is a bug that’s been fixed elsewhere but not propagated to Yg. Setting an attenuation from the FS (e.g. ifpic=*,*,10,10,7,7) always gives an “odd response from the pic” error. This also happens if I use the telnet interface.

I’ve checked the pointing and done a recording test, also run a test ‘schedule’ by typing in the usual sequence of commands from a schedule on the command line.

You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/pages/blog/yg_field_system_software_update.txt · Last modified: 2013/06/06 06:35 by Jim Lovell