This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
aov011
Hobart 12m:
Disk VSN: HOB+0120
Data volume at beginning: 23293.563 GB
Experiment Started okay (Liz)
Katherine 12m:
Disk VSN: BKG+0141
Data volume at beginning: 6.090 GB
17:30 Experiment started okay (Liz)
17:35 UT Alarm “mark 5 reports sync error. Check clock stability.” which developed into “dbbcn:error connect():dbbc device connection open timed-out”. Had to halt schedule, power cycle the DBBC and fmset to fix. First good scan 264-1815 (Liz)
18:25 UT Autocorrelations showing distinct but small delta-like peaks along the whole image. Better than before DBBC cycled so just leaving and watching for now. (Liz)
Yarragadee 12m:
Disk VSN: HOB+0100
17:52UT Experiment started late as slow changing modules since yg operator didn't know we needed a new module after he took the r1 module out… First scan: 264-1752 (Liz)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/aov011.1474396268.txt.gz · Last modified: 2016/09/20 18:31 by Jesse Swan