This wiki is not maintained! Do not use this when setting up AuScope experiments!
This is an old revision of the document!
R1722
Hobart
Module: HOB+0104, 5.500 GB
17:00 UT - Experiment started OK (Ross)
00:00 UT - Getting the following error frequently: “Error being ignored: error qk -211 tsys value for device id overflowed or was less than zero.” (Tiege)
06:00 UT - Reciever Error: “ALARM: Delay through DBBC has changed. Monitor for stability and reset DBBC if it drifts.” have continued to monitor the delay and does not seem to be drifting. (Tiege)
07:51 UT - 013-0751 scan missed due to telescope slewing. (Bryn)
Katherine
Module: HOB+0128, 1592.175 GB
17:00 UT - Experiment started OK (Ross)
22:00 UT - NOTE: Shortly after observations began, clock offset increased from stable 0.3 to stable 0.79, Ross left this how it is and it is still stable (@ 0.79) at handover. (Tiege)
Yarragadee
Module: MED-11011, 0.000 GB
17:00 UT - Experiment started OK (Ross)
You could leave a comment if you were logged in.
/home/www/auscope/opswiki/data/attic/handover/r1722.1452676020.txt.gz · Last modified: 2016/01/13 09:07 by Jesse Swan