This wiki is not maintained! Do not use this when setting up AuScope experiments!

Chair: Tiege

Attended: Katie, Simin, Mas, Patrick, Lucas

Apologies: Atifur, Jonny, Arwin, Ross

Absent:

General Issues

How has Hobart 26m pressure/temps been holding up?
- Keep an eye on this, be aware you may need to travel out to the telescope and pump the receiver.
- 70K temp is the one to watch, along with pressure on log monitor (or run cryotemp a few times, take the lowest value).
Maser at Yg - VNC is no longer working!
- Maybe need Brett to check it out.
Eremote control issues?
- Make sure you check the troubleshooting section, might need to kill the ERCD process.
- Can also use stream logs.
Module spreadsheet
- Double check sum file and make sure the drive listed is suitable.
- type 'sums_current' will open sum files for current experiment (also, 'sums_next')
Drifting clocks?
- Keep an eye on this, notes on the wiki on how to fix it. reboot DBBC should fix as last resort.
LBA coming up next month.
- Keep an eye on your emails.
be careful when Drudging from vex files, seems like it needs to be done on the relevant PC.

Handover Issues

* Disk usage preventing log files from being written (Yg)

* Drives stuck at Ke, this should be fixable on the drive control panel on timeke (or timeyg).

AuScope VLBI Operations Wiki