User Tools

Site Tools


This wiki is not maintained! Do not use this when setting up AuScope experiments!



Operations Meetings

Data Handling and Disk Logistics


Please use the Transfers Page for information on data transfer.


See the Modules Page

AuScope IVS Module Allocation

If there are any questions or issues with module logistics, please contact with the details.

See Experiment and Module Catalog for module allocations, inventory, transfers, upcoming and historic experiments;

Telescope calibration/monitoring procedures and notes

Stairwell Displays

AuScope Operations Log

Please enter any significant events related to the AuScope VLBI project, including observations, configuration changes, hardware upgrades etc.

Pointing model for Katherine after VGOS upgrade

After the receiver upgrade at Katherine, methanol maser observations (using on flexbuffke) indicated significant pointing offsets in both Az and El. After 24 hours of observing the data were combined into a MATLAB file and a new incremental pointing model was fitted to the offsets. The combined Pointing model values were then calculated and a new mdlpo.ctl file was created and tested on pcfske. The result has been a reduction in median pointing offset from 0.048 to 0.014 degrees.

The new pointing model is installed on pcfske as mdlpo.ctl with appropriate comments.

2019/09/11 10:07 · Jamie McCallum · 0 Comments

New MET station and server at Katherine

Ryan Ruddick from GA has replaced the GPS receiver at Katherine with a newer “Trimble” unit on This features a web interface that is mostly javascript unfortunately which the existing script cannot parse. A truly horrible lash-up has been created on [the UPS monitor PC] which opens firefox to load the siteand save the webpage as html, before extracting the MET data to a text file. This file is then copied to pcfske, where the edited wx function can read it. While ludicrous and somewhat embarrassing overdesigned, it is functional and should last until someone with a working knowledge of javascript can deal with the new MET server. In the meantime, please do not interfere with the firefox window eternally popping up on the dell2ke display.

2016/10/19 05:12 · Jamie McCallum · 0 Comments

MET4 repair at Yg

The humidity sensor on the MET4 isn't working and is going off for repair.

On pcfsyg as root:

pcfsyg:/etc/init.d# update-rc.d -f remove
pcfsyg:/etc/init.d# update-rc.d -f remove
pcfsyg:/etc/init.d# ./ stop
pcfsyg:/etc/init.d# ./ stop

Also commented out the call to wx in /usr2/proc/station.prc

2016/07/31 23:56 · Jim Lovell · 0 Comments

Katherine aircon

After installing the maser post refurb, and SSR installation for aircon compressor, the aircon was turned off at 0452 on Fri 3/6/16 and a large fan was turned on. 0430UT on 6/6/16 air con was turned on and large fan off and maser room closed.

The above has been done to see if the maser aircon at Ke is affecting the clock jump problem. Cheers, Brett

2016/06/06 04:42 · Brett Reid · 0 Comments

Yarragadee antenna servicing, December 2015

From Jack:

This is to let you know that the VLBI antenna on the 13/14th December had the following work done

1. Az bullgear old grease removed - new grease applied.
2. El jack screw cover was removed and more new grease applied to the jack screw arm. The jack screw cover itself was cleaned but is in need of replacing very soon. It would be good to get this done when Brett is over next. Also I need to check the gear box oil and or maybe change the oil with him?
3. The azimuth grease nipples inside the pedestal and the grease nipples on the antenna itself have had grease pumped in.
4. A general clean up was done inside the pedestal and the air conditioning filters removed and cleaned.
2015/12/15 01:22 · Jim Lovell · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/log.txt · Last modified: 2019/01/25 04:45 by Warren Hankey