User Tools

Site Tools


operations:log

This wiki is not maintained! Do not use this when setting up AuScope experiments!

Operations

Schedules

Operations Meetings

Data Handling and Disk Logistics

Transfers

Please use the Transfers Page for information on data transfer.

Modules

See the Modules Page

AuScope IVS Module Allocation

If there are any questions or issues with module logistics, please contact auscope-operations@list.utas.edu.au with the details.

See Experiment and Module Catalog for module allocations, inventory, transfers, upcoming and historic experiments;

Telescope calibration/monitoring procedures and notes

Stairwell Displays

AuScope Operations Log

Please enter any significant events related to the AuScope VLBI project, including observations, configuration changes, hardware upgrades etc.

Log monitor tracks DBBC delay jumps

If there is a change in delay through the DBBC then the Log Monitor will now ring an alarm. If the new delay offset is stable then you don’t need to do anything, but if it drifts, a DBBC reset may be required. So it’s still necessary to dump and plot the delay offset data regularly but you will now get an audible warning every time the delay through the DBBC changes.

The new version of the log monitor is the default on ops2 but it will need to be propagated to the ops PC at Mt Pleasant once the current experiment is over. If for some reason the new version crashes, you can still use the old version on ops2 by typing:

/usr2/st/bin/pcfs_log_monitor_2015_06_02.pl

2015/06/02 01:52 · 0 Comments

rxmon timeout now rings the alarm

If connection with rxmon fails with this error message:

ERROR s5 -104 rfpcn: time-out, connection closed

… then the log monitor will ring an alarm. This change was made by adding the text “S5 -104 ALARM” to /usr2/control.[hb|ke|yg]/alarm_actions.txt on ops2 etc.

2015/06/01 23:24 · 0 Comments

Yg pointing check 5/8/2014

Antenna has a +0.04 deg elevation offset. pdplt reports the following on raw data (207 points):

xEL mean 0.006
xEL rms 0.010
El mean 0.0442
El rms 0.008

After solution applied:

xEL rms 0.011
El rms 0.010

2014/08/05 23:09 · 0 Comments

Ke pointing check 5/8/2014

Overnight pointing run. 113 observations. Looks good. On the raw data, pdplt reports:

xEL mean 0.0015 deg
xEL rms 0.0095 deg
El mean -0.0076 deg
El rms 0.012 deg
2014/08/05 23:01 · 0 Comments

Hb pointing model 2014/205

The Hb pointing model has been updated in the PCFS based on data taken around day 205.

Pointing observations on days 216/217 were made and verify new solution looks good.

2014/08/04 04:14 · 0 Comments
/home/www/auscope/opswiki/data/pages/operations/log.txt · Last modified: 2019/01/25 04:45 by Warren Hankey