This wiki is not maintained! Do not use this when setting up AuScope experiments!

This is an old revision of the document!

---

Meeting 10.06.2015

1. ERC 26m change set-up list
2. Date wrong – don't report
3. Yg attenuation 15dB now,
4. WiFi at Yg – contact them about using it – don'd!
5. Error -524 – IPS in hobart, power cycle gpib (in the notes). Fixes if it is communications
6. Disable the alarm through control file – instructions
7. Hb still lags, restarting Rxmon didn't help?
8. New implementation – check
9. Keep the RXmon window open.
10. Comments in the end message – most important problems degrading data quality.
11. How much data were recorded on each module