User Tools
operations:pointing
This wiki is not maintained! Do not use this when setting up AuScope experiments!
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
operations:pointing [2016/07/24 23:34] Jim Lovell [Version 2016.151] |
operations:pointing [2017/05/30 07:12] (current) Jamie McCallum [Version 2016.135] |
||
|---|---|---|---|
| Line 60: | Line 60: | ||
| ===== Hobart 12m model ===== | ===== Hobart 12m model ===== | ||
| + | |||
| + | ==== Version 2016.135 ==== | ||
| + | |||
| + | Taken following the installation of the new cable wrap. | ||
| + | |||
| + | Newly derived coefficients: | ||
| + | <code> | ||
| + | 00008 2017 135 00 53 37 0 | ||
| + | 90.0000 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 | ||
| + | -0.7106876969 0.0000000000 0.0228546374 0.0497939363 0.0030318052 | ||
| + | -0.0002992165 0.1175717711 0.0146358637 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0019028779 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | </code> | ||
| + | |||
| + | The HMI controller was updated 30/05/17 | ||
| + | |||
| + | |||
| + | ^ FS Coeff ^ HMI Coef ^ New FS model ^ | ||
| + | | P1 | G2| -0.7107 | | ||
| + | | P3 | G3| 0.0229 | | ||
| + | | P4 | -G1| 0.0498 | | ||
| + | | P5 | G5| 0.0030 | | ||
| + | | P6 | -G4| -0.0003 | | ||
| + | | P7 | G7| 0.1176 | | ||
| + | | P8 | G8| 0.0146 | | ||
| + | | P23 | G9| 0.0019 | | ||
| + | |||
| + | ^ HMI Coef ^ Value ^ | ||
| + | | G1 | -0.0498 | | ||
| + | | G2 | -0.7107 | | ||
| + | | G3 | 0.0229 | | ||
| + | | G4 | 0.0003 | | ||
| + | | G5 | 0.0030 | | ||
| + | | G6 | not used | | ||
| + | | G7 | 0.1176 | | ||
| + | | G8 | 0.0146 | | ||
| + | | G9 | 0.0019 | | ||
| + | ==== Version 2016.235 ==== | ||
| + | |||
| + | Taken following re-installation of S/X feed and movement of subreflector to original position. | ||
| + | |||
| + | Newly derived coefficients: | ||
| + | <code> | ||
| + | 00007 2016 235 23 14 09 0 | ||
| + | 90.0000 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 | ||
| + | -0.4333212972 0.0000000000 0.0158737078 0.0405583084 0.0002418841 | ||
| + | 0.0006486370 0.1193821207 0.0167687163 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0006459429 0.0000000000 0.0000000000 | ||
| + | 0.0000000000 0.0000000000 0.0000000000 0.0000000000 0.0000000000 | ||
| + | </code> | ||
| + | |||
| + | ^ FS Coeff ^ HMI Coef ^ New FS model ^ | ||
| + | | P1 | G2| -0.4333 | | ||
| + | | P3 | G3| 0.0159 | | ||
| + | | P4 | -G1| 0.0406 | | ||
| + | | P5 | G5| 0.0002 | | ||
| + | | P6 | -G4| 0.0006 | | ||
| + | | P7 | G7| 0.1194 | | ||
| + | | P8 | G8| 0.0168 | | ||
| + | | P23 | G9| 0.0006 | | ||
| + | |||
| + | ^ HMI Coef ^ Value ^ | ||
| + | | G1 | -0.0406 | | ||
| + | | G2 | -0.4333 | | ||
| + | | G3 | 0.0159 | | ||
| + | | G4 | -0.0006 | | ||
| + | | G5 | 0.0002 | | ||
| + | | G6 | not used | | ||
| + | | G7 | 0.1194 | | ||
| + | | G8 | 0.0168 | | ||
| + | | G9 | 0.0006 | | ||
| + | |||
| + | Field system and HMI have been updated | ||
| ==== Temporary HMI model ==== | ==== Temporary HMI model ==== | ||
/home/www/auscope/opswiki/data/attic/operations/pointing.1469403262.txt.gz · Last modified: 2016/07/24 23:34 by Jim Lovell
Page Tools
